Heaters

MRCOOL's 20Kw ProDirect Heat Kit is an efficient and effective heating element intended for use with air handlers Features Features 20kW heat strip. Minimum circuit: 50 Amps. Maximum fuse breaker: 60&60 Amps. Capacity: 48K/60K. UL Listed. Dimensions: 12-in (L) x 9-in (W) x 2.6-in (H). Specifications Specifications Length: 12 inch...

If you've been enjoying your new MrCool ProDirect system but it's the dead of winter and you're finding you need a little extra heat, there's no need to fear, because the PHK10H 10kW Electric Heat Kit for MrCool ProDirect - Circuit Breaker can give you the extra warmth you need....

MRCOOL's 7Kw ProDirect Heat Kit is an efficient and essential heating element for installation in air handlers. Features Features 5kW heat strip. 7.5 rated load. Minimum circuit: 40 Amps. Max fuse breaker: 60 Amps. Capacity: 18K/24K/30K/36K/42K/48K/60K. UL Listed. Dimensions: 12-in (L) x 9-in (W) x 2.6-in (H) Specifications Specifications Part...

Description The Lasko ceramic tower heater, with mechanical thermostat, can easily fit any available table or floor space and provide effective heat distribution. It has convenient features such as an adjustable thermostat, three quiet comfort settings plus a push-button oscillation mode that spreads the heat around. Safety features include a...

Specifications Specifications Dimensions: Depth: 2.6" Height: 12" Width: 19" Electrical Specifications: Voltage: 240 V Max Fuse Breaker: 60 A Min Circuit Ampacity: 40 A Rated Load: 7.5 Heating Specifications: Auxiliary Heater Sizes: 7.5 KW Certifications: UL Listed: Yes

Description The Single Wall Switch is wireless and battery-less, making it easy to install. The Switch has a range of 80 feet. The Single Wall Switch can control one heater, or many heaters. When controlling many heaters, there is a zone heating effect. To control many heaters, the Relays (one per heater) and Switch need...

Description For higher ceilings or uneven sloped ceilings, the Drop Down Poles will bring the heater to a suitable mounting height. Features Features The poles screw into the standard mounting brackets. These brackets come in the box with the heater. The poles can be cut to size for angled or...

Description HeatStrip USA Flush Mount Enclosure for 3200 Watt HeatStrip Large and Restaurant Heater - 73.6" x 11" x 4.9" - Marine grade stainless steel facia, blend in black backing Specifications Specifications Part no: THHAC-009 Dimensions: 73.6” x 11” x 4.9” Materials: Marine grade stainless steel facia, blend in black backing....

Description HeatStrip USA Flush Mount Enclosure for 2400 Watt HeatStrip Regular and Cafe Heater - 57.5" x 11" x 4.9" - Marine grade stainless steel facia, blend in black backing Specifications Specifications Part no: THHAC-009 Dimensions: 40.3” x 11” x 4.9” Materials: Marine grade stainless steel facia, blend in black...

Description HeatStrip USA Flush Mount Enclosure for 1500 Watt HeatStrip Mini Heater - 40.3" x 11" x 4.9" - Marine grade stainless steel facia, blend in black backing Specifications Specifications Part no: THHAC-009 Dimensions: 40.3” x 11” x 4.9” Materials: Marine grade stainless steel facia, blend in black backing. Downloads...

Description HeatStrip USA Hand held remote control. Heatstrip heater remote control can control two heaters individually. Include Include 1 x Remote Control Downloads & Dimensions Downloads & Dimensions Cut Sheet HUSA06 Remote Control

Description The relay is hardwired to the back of the heater and physically turns the power ON and OFF to the heater. The wireless wall switch sends a signal to the relay to tell it to turn the power ON and OFF. The switch needs to be within 80' of the...

Description HeatStrip USA Double Wall Switch for controlling two heaters independently - Can control two heaters individually or two groups of heaters (zone heating) To be used with RELAY HUSA05 - sold separately Include Include 1 x Heatstrip Double Wall Switch To be used with RELAY HUSA05 – sold separately...

Description HeatStrip USA Single Switch Kit Includes Remote Control, Double Wall Switch & Two Relays - Everything you need to individually control two heaters. Heatstrip Double Switch Kit can also be used for two zones of heaters. Includes Includes 1 x Remote Control 1 x Double Wall Switch 2 x Relay...

Description HeatStrip USA Single Switch Kit Includes Remote Control, Single Wall Switch & Relay - Everything you need to control one heater. Heatstrip Single Wall Switch also be used to control one zone of heaters. Includes Includes 1 x Remote Control 1 x Single Wall Switch 1 x Relay Downloads...

Description For higher ceilings or uneven sloped ceilings, the Drop Down Poles will bring the heater to a suitable mounting height. Features Features The poles screw into the standard mounting brackets. These brackets come in the box with the heater. The poles can be cut to size for angled or...

Description For higher ceilings or uneven sloped ceilings, the Drop Down Poles will bring the heater to a suitable mounting height. Features Features The poles screw into the standard mounting brackets. These brackets come in the box with the heater. The poles can be cut to size for angled or...

Description For higher ceilings or uneven sloped ceilings, the Drop Down Poles will bring the heater to a suitable mounting height. Features Features The poles screw into the standard mounting brackets. These brackets come in the box with the heater. The poles can be cut to size for angled or...

For portable heating, pair Hanover's tripod stands with one of our infrared heat lamps. Hanover's sturdy tripod stand is adjustable from 43 to 70 inches so you can set it up to the exact height you need. Compatible infrared heaters include HAN1031IC-SLV, HAN1041IC-BLK, HAN1051IC-SLV, and HAN1052IC-BLK. For all your outdoor...