SunGold Power - 10kw 24v split phase inverter | SG10K24SPI
FREE SHIPPING
- Regular price
- $3,012.90
- Regular price
-
- Sale price
- $3,012.90
- Unit price
- per
This inverter charger is built with UPS function to provide uninterrupted power to run household electric devices. The solar inverter comes with an internal transfer switch, so you don’t have to do anything when the power goes out. All the devices you have selected will be connected to the back-up power source automatically. In fact, you will not even notice that the power cut happened.
- It is built-in 120 amp battery charger uses AC power, from the grid or from a generator, to recharge different kinds of battery bank.
- Built-in solar controller, Maximum solar input voltage 145V, Maximum solar input current 60A, can also connect with external controller.
- Low Frequency Inverter, High Quality, your best choice for your 24V home system.
Features
- 10KW split phase pure sine inverter charger DC 24V AC 240V input AC output 120V/240V
- Auto Generator Start (AGS)
- Support Solar Panel with MPPT Function
- Include Battery Temperature Sensor (BTS) and Remote Control
- 8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries)
- Compatible With All kind of Home & Office Appliances
- Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
- Built-in transfer switch and battery charge, backup or off grid power solutions
- AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
- 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
- 8 ms Typical Transfer Time Between Utility & Battery,Ensure Power Continuity
- 15s Delay Before Transfer when AC Recover, Protection for Load when Used with Generator
- Solar Input Voltage Range: 30-145Vdc
- Max.PV Open Circuit Array Voltage: 145Vdc
- Rated Charge Current: 60A
- Over Charge Disconnection: 29.6V
- Over Charge Recovery :27.2V
- Over Discharge Disconnection:21.6V
- Over Discharge Reconnection :24.6V
- 10000W 24V Split Phase Pure Sine Wave Solar Power Inverter
- English Manual
- Remote Control
- BTS Cable
Specifications
- Continuous Output Power :10.0KW
- Surge Rating(20s): 30.0KW
- Output Waveform: Pure Sine Wave
- AC Output Voltage: 120V and 240V
- AC Input Voltage: 240V
- DC Battery Voltage: 24Vdc
- Solar charger Current: 60Amp
- AC Battery charger: 120±5Amp
- Output Frequency: 50Hz /60Hz
- Typical transfer Time: 10ms(Max)
- Nominal Input Voltage : 24.0Vdc
- Minimum Start Voltage :20.0Vdc / 21.0Vdc
- Low Battery Alarm : 21.0Vdc / 22.0Vdc
- Low Battery Trip : 20.0Vdc / 21.0Vdc
- High Voltage Alarm :32.0Vdc
- Low Battery voltage recover :31.0Vdc
- Power Saver on Idle Consumption: 35W
- Power Saver off Idle Power:150W
Dimensions & Weight
- Unit Weight: 149 LB
- Unit Size: 27.6 x 16.5 x 8inch
- Shipping Weight: 183LB
- Shipping Size: 33 x 21.3 x 16inch
Downloads & Manuals
Need More Help?
Our expert can help guide you through
your purchase.
or send us an email
This inverter charger is built with UPS function to provide uninterrupted power to run household electric devices. The solar inverter comes with an internal transfer switch, so you don’t have to do anything when the power goes out. All the devices you have selected will be connected to the back-up power source automatically. In fact, you will not even notice that the power cut happened.
- It is built-in 120 amp battery charger uses AC power, from the grid or from a generator, to recharge different kinds of battery bank.
- Built-in solar controller, Maximum solar input voltage 145V, Maximum solar input current 60A, can also connect with external controller.
- Low Frequency Inverter, High Quality, your best choice for your 24V home system.
Need More Help?
Our expert can help guide you through
your purchase.
or send us an email